45°Aluminum Alloy Milling Cutter Head KM12 SE12 Chuck 50 63 80 100 2T 4T 5T 6T SEHT1204 Blade, for FMB22 FMB27 FMB32 Tool Holder

Cutting performance

The cutter head has good chip removal performance and is suitable for inclined surface processing, spiral processing, etc., but in these cases, the feed speed needs to be reduced for processing.

Installation and debugging

Before installing the cutter head, make sure the spindle and chuck of the machining center are clean and free of impurities and oil. Use a
suitable wrench or tool to fix the cutter head to ensure that it is stable and not loose. During debugging, pay attention to the fine-tuning function of the cutter head and make appropriate adjustments according to specific needs to ensure the stability and accuracy of the cutting process.

The role of the screw sleeve

Screw sockets can effectively protect screw heads and prevent damage during disassembly or installation. Due to the fact that the screw head is the most easily damaged part inside the screw, using a screw socket can prevent damage to the screw head during operation, while also protecting the appearance of the screw head from damage

Structural features

The 45-degree angle design enables the cutter to effectively dissipate the main cutting force to the axial direction during the cutting process, greatly reducing the radial force and improving the impact resistance of the tool. This structure can also effectively reduce vibration in large overhang milling.‌

Processing material

SEHT1204 inserts are suitable for processing aluminum, brass and bronze. Specifically,
SEHT1204 inserts perform well in processing aluminum, brass and bronze, and are used for processing aluminum alloys, with the function of high-gloss 45-degree face milling.