Lexia 3 PP2000Supported Functions:

Unlike
other universal car scanner tools which only read fault codes; this
software performs nearly ALL the functions like the original dealer
diagnostic tool. Our diagnostic interface contains CAN-Line multiplexor,
CAN-BUS interfaces and SAE J1850 bus.

1. Read Identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc.

2. Read Fault Codes

Displays
all stored and pending fault codes with complete description (e.g.
“Rail pressure – too low pressure”).Program supports report printing or
copy to clipboard.

3. Clear Fault Codes

This function clears all stored fault codes and other diagnostic information.

4. Auto-Scan (Complete Car Scan/Test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, et

Car coverage:

1.P2000,Lexia 3 is compatible with most for Peugeot cars from 2005.

2.
PP2000, Lexia-3 is implemented through the OBD II connector (located
near the steering wheel) or manufacturer specific connector (only for
vehicles after 2005)

Important note: (The old K-line before 2000 does not support it) The vehicle coverage is approximately 2005-

Important reminder:

Standard
configuration V7.83 and V9.85 software. V7.83 is installed on
WIN732-bit systems, while V9.85 can be installed on WIN7 and WIN10.
(Both versions of the software support Peugeot and Citroën)

Features supported by Lexia 3 PP2000:

Different
from other General Motors scanning tools that only read fault codes;
This software performs almost all functions similar to the original
dealer diagnostic tool. Our diagnostic interfaces include CAN line
multiplexers, CAN-BUS interfaces, and SAE J1850 buses.

Lexia 3 PP2000Supported Functions:

Unlike
other universal car scanner tools which only read fault codes; this
software performs nearly ALL the functions like the original dealer
diagnostic tool. Our diagnostic interface contains CAN-Line multiplexor,
CAN-BUS interfaces and SAE J1850 bus.

1. Read Identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc.

2. Read Fault Codes

Displays
all stored and pending fault codes with complete description (e.g.
“Rail pressure – too low pressure”).Program supports report printing or
copy to clipboard.

3. Clear Fault Codes

This function clears all stored fault codes and other diagnostic information.

4. Auto-Scan (Complete Car Scan/Test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, et

Car coverage:

1.P2000,Lexia 3 is compatible with most for Peugeot cars from 2005.

2.
PP2000, Lexia-3 is implemented through the OBD II connector (located
near the steering wheel) or manufacturer specific connector (only for
vehicles after 2005)