89Sabers 1 Zoll 7/8 Zoll OD Neopixel-Klinge 36/33/29 Zoll Länge Gleichmäßige Klinge Diffusion Leichte Klinge Für Schweres Duell

Our first complete blade offering using all neopixel sabers

Yoda saber neopixel blade size is 3/4 inch 60cm length,standard blade size.

Each blade uses our own designed and developed V2 custom LED strip

Features of this blade are:

LEDs mounted on both sides of the internal strip already staggered for best diffusion.
shaped blade tips.
ANTSABER blade side PCB (highest copper weight on the market for maximum efficiency and brightness).
Heavily tested LED Strip copper thickness to ensure the best efficiency and voltage drop.
Higher pixel density – more than the traditional 144 LEDs per metre!
Approximatley 36″ Length for 90cm and 33″ Length for 82cm and 29″ Length for 75cm. We do not offer custom lengths at this time. 1″ Outer diameter. Thin walled. (7/8″ OD ).

Carefully chosen LED chips from reliable suppliers that offer the highest quality and brightness.

A few points to note before purchasing.
If using Proffie/Verso/CFX etc. You must define the amount of LED pixels in your config as 132 for the 90cm strip size and 122 for the 82cm strip size.

These blades are not sanded. We found that these blades perform better in terms of even illumination without sanding. If you prefer sanding, you can sand the outside of the blade yourself with 180-240 grit sandpaper.